Changing the NTP server in Solaris or Linux.

September 21, 2009
By

Here is how you can change the NTP server’s information on your Solaris server.

Edit /etc/inet/ntp.conf

add the below line

server ntp.paris.hilton.com

You will now need to restart the NTP service.

/etc/init.d/xntpd stop
/etc/init.d/xntpd start

The last thing you need to do is to check to see if the client is communicating with the NTP server. The ntpq command is very useful for this purpose. Below is a snapshot.

# ntpq
ntpq> peer
remote refid st t when poll reach delay offset disp
==============================================================================
*ntp.paris.hilton.com 10.20.30.40 5 u 35 64 377 0.69 -0.541 0.23
ntpq> exit

After the ntpq command is issued the promtp will change to ntpq>. entering peer will display all the remote servers the client is sychronized with. To exit the ntpq shell simply enter exit.

In Linux the ntp.conf file is located in /etc/ntp.conf, and the command to restart the ntp service is service ntpd restart.

Be Sociable, Share!

Tags: ,

One Response to “ Changing the NTP server in Solaris or Linux. ”

  1. cataract surgery on May 28, 2014 at 8:33 pm

    Hi there! I just wanted to ask if you ever have any problems with hackers?
    My last blog (wordpress) was hacked and I ended up losing
    a few months of hard work due to no backup.
    Do you have any methods to protect against hackers?

Leave a Reply